Black Widow 1R / 2-BUTTON SERIES Manual de usuario descargar pdf (Pagina 6)

6

Complete Default Reset

Following this procedure will set all

programmable features to factory default

settings.

1. Enter System Programming.

2 .Press Transmitter Buttons 1&2 together.

• The siren will chirp 6 times indicating

the reset signal was received.

• All programmable features are now set

to factory default settings.

2. Turn ignition off.

Programmable Features

1. Arming Mode. Select between manual

arming (Active), automatic arming (Passive),

and automatic arming with chirps that

countdown every 2 seconds until armed.

2. Passive Locking. Selects whether or not

the system will automatically lock the doors

with Passive Arming.

3. Ignition Locking. Automatically locks and

unlocks the doors with the ignition. The

system will not lock the doors if any door is

open when the ignition is turned on.

4. Arming Chirps. Select Normal or Silent

Arming.

5. Siren / Horn Chirps.When set for Horn

Chirps the horn will honk when the alarm is

armed, disarmed, and triggered, allowing the

siren to NOT be installed. Buttons 1&2

together add horn chirps with the warn away

feature.

6. Anti-Carjack Activation. Enables or

disables the anti-carjacking feature.

7. Anti-Carjack Mode. Selects one of three

Anti-Carjacking modes: Active, Passive, or

Full-Time. Anti-Carjack Activation must be

enabled for any Anti-Carjack mode to

operate.

Active. Pressing transmitter buttons 1&2 with

the ignition on will manually activate the

Anti-Carjacking feature.

Passive. When selected, the Anti-Carjacking

feature will activate whenever a door is

opened while the ignition is on.

Full-time.When selected, the Anti-Carjacking

feature will automatically activate each time

the ignition is turned on.

8. Two Stage Disarm. When selected,

pressing the button to disarm the system

during a trigger cycle will instead reset the

siren and leave the alarm armed. Pressing

the button again will disarm the system.

Programmable Features

Step

Function Button 1 (default) Button 2 Buttons 1&2

1. Arming Mode Active Passive Passive w/countdown

2. Passive Locking Off On –

3. Ignition Locking On Off –

4. Arming Chirps Normal Silent –

5. Siren / Horn Chirps Siren only Horn chirps –

6. Anti-Carjack Activation Disabled Enabled –

7. Anti-Carjack Mode Active Passive Full-time

8. Two Stage Disarm Off On –

BW1900.qxd 7/1/2005 4:16 PM Page 6

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comentarios a estos manuales

Sin comentarios