Black Widow 6R-BUTTON SERIES Manual de usuario Pagina 3

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 8
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 2
3
LED INDICATIONS
On Solid = Valet Mode
On Solid when not in valet = Open Zone
Slow Flash = System Armed
Rapid Flash when disarmed = Passive
Arming
Rapid Flash when armed = Tamper Alert
PARKING LIGHT INDICATIONS
1 Flash = System Armed
2 Flashes then on solid for 10 seconds =
System Disarmed
3 Flashes = Tamper Alert
4 Flashes = Open Zone Indication (after
arming)
the system is in valet mode, or turn
off indicating valet mode exit.
OPTIONAL TRUNK RELEASE
Press button 3 for approximately 3 seconds
to open the trunk.
OPTIONAL 2ND AUX/CAR FINDER
Press button 4 for approximately 3 seconds
to activate the second auxiliary output/car
finder feature. When second auxiliary
function is activated, the parking lights will
flash 5 times and the siren will chirp as
confirmation. This output can be connected
to a relay to control additional functions like
power window roll-up, or an optional device
such as a remote car starter. If the output is
not connected, it still serves as a car finder
feature to identify the vehicle in a large
parking area.
OPTIONAL ANTI-CARJACK MODE
For added security while driving the vehicle,
the optional anti-carjacking feature will
activate whenever a door is opened after the
ignition has been turned on. This feature must
be enabled during installation.
If the anti-carjack feature is triggered:
The system will provide no indications
for 60 seconds.
After 60 seconds, the siren will chirp for
10 seconds providing time to press the
valet switch and deactivate the system.
If not deactivated with 10 seconds, the
system will enter full trigger mode.
The parking lights will flash and the
siren will sound in full alarm.
The starter defeat will turn on and until
the anti-carjack mode is deactivated.
To deactivate the anti-carjack when triggered:
1. Turn the ignition key off then back on.
2. Press the valet switch once.
The siren will pause briefly.
3. Turn the ignition key off.
4. Press the transmitter button 2.
The system will disarm.
BW2450.qxd 6/11/2009 4:12 PM Page 3
Vista de pagina 2
1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios